Gears

Miter gears are a single kind of bevel gears where in fact the two rotational axes intersect. When talking about narrow description of bevel gears with capability to increase or reduce speed, miter gears don't have that ability because of the pair’s same amount of tooth. Their purpose is...

Bevel gears are used extensively in a wide variety of industries and mechanical operations due to the most important advantage they offer: smooth and low-noise power transmission between non-parallel shafts at almost any angle or speed. However, due to the mathematical complexity of their...

Raydafon, Module 1, 20 Tooth, Nylon Bevel Gears Bore Type : Plain Gear Ratio : 2.0 Module : 1 No. of teeth : 20 Direction of Spiral : N/A Shape : B3 Bore (A) : 6.0 (mm) Hub Diameter (B) : 16.0 (mm) Pitch Diameter (C) : 20.00 (mm) Outer Diameter (D) : 22.41 (mm) Mounting Distance (E) : 28.0...

LM1.25-20, Module 1.25, 20 Tooth, Sintered Metal Miter Gears Specifications Gear Type Miter Gears Construction Sintered Metal Miter Gears Bore Type Plain Gear Ratio 1.0 Module 1.25 No. of teeth 20 Shape B1 Bore (A) 6.0 (mm) Hub Diameter (B) 22.0 (mm) Pitch Diameter (C) 25.00 (mm) Outer Diameter...

Plastic gears have significant advantages over their metal counterparts in several ways. Plastic materials are lighter than metals. This allows for weight reduction in machine design. They are quiet, absorb vibration and do not need lubrication.

When your machine's precision motion drive exceeds what can easily and economically be achieved via ball screws, rack and pinion is the logical choice. Our products are precision ground and meet AGMA 9 specs. Best of all, our gear rack comes with indexing holes and mounting holes pre-bored. That saves you lots of time, hassle and expense. Just bolt it to your frame.