Industrial Gearboxes

Product description Specifications: Material: Brass Color: Yellow Brand name: CNBTR Modulus: 0. 5 Weight: 16g Size of worm wheel: Teeth: 20 Teeth Dia: 11. 2mm Height: 12mm/0. 47inch Outer Diameter: 11mm/0. 43inch Hole Diameter: 4mm/0. 16inch Step Size: 9x7mm/0. 35x0. 27inch ( Dia x H) Overall...

Raydafon Precision Helical Tooth Ground Rack, standard product specifications from module M1.5 to M12, offers lengths of 1000mm and 2000mm. The demand for precision in various industries is more and more accurate, so the use of 2 meters long racks becomes more and more extensive, which can not only reduce the man-hours for installing the machine, but also reduce the gap tolerance between the racks.

It is made of high alloy steel for strength and durability. The 20-degree pressure angle (PA) provides a lower contact ratio between gears than a 14.5-degree pressure angle. The rack has up to 6' of linear movement, a 0.50" face width, an overall thickness of 0.50", and a 0.05" addendum. This gear rack is intended for use with pinion gears with the same pressure angle and diametral pitch (number of teeth per inch). It is suitable for use in a variety of commercial and industrial applications, such as machine tool tables, lift mechanisms, guide mechanisms, and shakers, among others.

Small module gear machining methods, based on the teeth machining methods, it can be devided into two categories: Cutting processing, methods include milling, hobbing, gear shaping, gear-shaping, shaving, broaching, punching tooth, lapping, polishing teeth, honing and the like. Non-cutting processing, methods include cold-toothed, hot tooth, casting and molding and the like. Small module bevel gears machining method Small bevel gears commonly used machining methods include gear-shaping and hobbing.

Automatic door closer to optionally install a compatible sliding door system. Piston with spring, which closes the door automatically and accompanied, when you reach the end of its journey

SPLINED SHAFTS AND BUSHINGS At Raydafon, we offer custom manufacturing and engineering of involute, splined shafts and bushings including: Flat-root, side-fit: This type of splined shaft has a marginally, greater minor(male) diameter and a lesser, major(female) diameter. These shafts provide...