Gearboxes & Reducers

Worm gears are usually used when large speed reductions are needed. The reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear. But worm gears have sliding contact which is quiet but tends to produce heat and have relatively low transmission...

The Rack & Pinion is used to convert between rotary and linear motion. The rack is the flat, toothed part, the pinion is the gear. Rack and pinion can convert from rotary to linear of from linear to rotary.The diameter of the gear determines the speed that the rack moves as the pinion turns.Rack and pinions are commonly used in the steering system of cars to convert the rotary motion of the steering wheel to the side to side motion in the wheels.

Specifications: Material: Brass Color: Yellow Brand name: CNBTR Modulus: 0.5 Weight: 16g Size of worm wheel: Teeth:20 Teeth Dia :11.2mm Height: 12mm/0.47inch Outer Diameter: 11mm/0.43inch Hole Diameter: 4mm/0.16inch Step Size: 9x7mm/0.35x0.27inch ( Dia x H) Overall Size:...

Miter gears are one type of bevel gears where the two rotational axes intersect. When speaking of narrow definition of bevel gears with ability to increase or decrease speed, miter gears do not have that ability due to the pair’s same number of teeth. Their purpose is limited to the change in...

Spiral bevel gears are bevel gears with helical teeth positioned in a 90-degree angle. The teeth are designed with a slight curve to provide better flexibility and traction. Although they can be considered a hypoid gear, they have no offsets, which indicates they will not slip during operation....

The GAM Helical Rack and Pinion series, along with our broad gearbox offering, provide a complete linear solution. Use our motion control engineering expertise to select the rack and pinion and match it with the right gearbox for your application.