Cycloidal Reducer

This zero backlash cycloidal reducer allows mounting of the load directly to the output flange or outer case without the need for additional bearings. The TwinSpin reducer series is the smallest cycloidal available on the market, featuring dual cross roller bearings, low inertial high speed...

Send Inquiry

Product Description

9 sizes from 60 – 300mm

Single stage ratios from 33:1 to 191:1

Rated output torque from 37 Nm to 2940 Nm

Input shaft sizes from 6 mm to 28 mm.

Rated input speed up to 2,000 RPM

Zero Backlash.

High Tilting Moment Capacity; 107 to 12000 Nm.

High Positioning Accuracy <1 arc minute.

High Positioning Repeatability <1 arc minute of lost motion.

High Torsional Stiffness from 3.5 through 680 Nm/arc min.

High Tilting Stiffness from 27 through 3500 Nm/arc min.

High Radial Force from 2600 N to 45300 N

High Axial Force from 3700 N to 68100 N.

Cycloidal Reducer

Model BL BLD (Single Stage Reduction) Contouv and inst alltion dimensions

Cycloidal Reducer

Frame No.	Contour dimensions(mm)				Installstion Dimensions(mm)								Size of Shaft End(mm)
Frame No.	M	H1	H2	J	E	F	G	N	P(h9)	Q	R	S	B	T	D	L	b	C	d	Y
10	160	185	129	JVAccording to the Dimensions of Medium Flange and Motor	32	10	11	4	110	134	3	M4	6	20.5	18js6	28	5	16	14js6	20
12	190	215	165		39	10	11	4	140	160	3	M8	8	33	30js6	35	5	17	15js6	22
15	230	262	200		53	14	11	6	170	200	4	M8	10	38.5	35k6	45	6	22.5	20js6	30
18	260	335	260		72	15	11	6	200	230	4	M8	14	49	45k6	65	8	28	25js6	40
22	340	393	311		92	-	13	6	270	310	4	M10	16	60	55k6	80	8	33	30js6	45
27	400	462	359		100	-	15	8	320	360	5	M12	20	76	70m6	94	10	38.5	35k6	60
33	490	545	432		120	30	18	12	400	450	5	M16	24	97	90m6	113	14	49	45k6	70
39	580	668	528		139	35	22	12	460	520	8	M20	28	108	100m6	130	16	55	50k6	80
45	650	783	594		180	40	26	12	520	590	10	M24	28	116	110m6	165	16	60	55k6	82
55	880	966	733		215	45	32	12	680	800	10	M30	36	140	130m6	200	20	76	70k6	105
65	1000	1121	-		255	45	32	12	760	920	10	M30	40	141	160m6	240	24	87	80k6	103