Other

1, Used to open and close greenhouse curtaining system 2, Large Torque 3, Stable performance 4, Accurate limit control

The gearbox is the second stage in the transmission system, after the clutch . It is usually bolted to the rear of the engine , with the clutch between them. Modern cars with manual transmissions have four or five forward speeds and one reverse, as well as a neutral position. The gear lever ,...

Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements M1, M2, M3 Metric Worm Reduction Gearboxes Small precision with multi-shaft arrangements • 6:1 to 100:1 • Torque 1 to 10 Nm • Drilled and tapped mounting holes on top and bottom • Flush fitting bearing caps easy to...

Raydafon gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new standards for reliability, efficiency and economy with unparalleled features including hollow shafts in the smallest sizes....

Rated voltage: 12V Reduction ratios: 1/270 Direction of rotation: CW No load speed: 10.8 ±10%rpm No load current: 0.035A (max 0.43A) Rated torque: 2.4kg.cm Rated speed: 9.3 ±10%rpm Rated current 0.068A (max 2.4A)

Raydafon eccentric worm-drive pumps are suitable for pumping thin to high-viscosity fluids. The displacement pumps work with low turbulence at a constant pressure and provide for a gentle and pulsation-free operation. Whereas the series 550 pumps are used in the industrial sector the series...