Other

The Rack & Pinion is used to convert between rotary and linear motion. The rack is the flat, toothed part, the pinion is the gear. Rack and pinion can convert from rotary to linear of from linear to rotary.The diameter of the gear determines the speed that the rack moves as the pinion turns.Rack and pinions are commonly used in the steering system of cars to convert the rotary motion of the steering wheel to the side to side motion in the wheels.

This 27:1 ratio worm gear set provides a compact way to create a drastic reduction in the output speed of a gear motor. The 1/4" D-bore of the stainless worm will allow it to mount on a 1/4" D-shaft which is used throughout the Raydafon build system. The mating worm gear mounts on a...

A gear is a rotating machine part that utilizes cut teeth, or cogs, to mesh with another toothed part—usually another gear or a linear toothed part (called a gear rack)—to transmit rotational motion and torque. By using a combination of precision gears with the correct ratio, the speed, torque,...

Specifications: Material: Brass Color: Yellow Brand name: CNBTR Modulus: 0.5 Weight: 16g Size of worm wheel: Teeth:20 Teeth Dia :11.2mm Height: 12mm/0.47inch Outer Diameter: 11mm/0.43inch Hole Diameter: 4mm/0.16inch Step Size: 9x7mm/0.35x0.27inch ( Dia x H) Overall Size:...

Raydafon manufactures worm gear sets, which are comprised of a worm and worm wheel, for use in a variety of industries including aerospace and military instrumentation, medical, dental, oil and gas exploration, robotics, optical and industrial controls. Our precision worm gear sets can be...

Miter gears are one type of bevel gears where the two rotational axes intersect. When speaking of narrow definition of bevel gears with ability to increase or decrease speed, miter gears do not have that ability due to the pair’s same number of teeth. Their purpose is limited to the change in...